JJ-CCR ApS 2017
www.JJ-CCR.com
2017 JJ-CCR ApS – 2.00 / Revision 06
14
4.2
Handle
The following image shows the handle, which is
screwed into the two tubes on the base unit. The
handle facilitates easy lifting of the JJ-CCR under
all circumstances. The two tubes can be used for
an additional trim weight.
Important:
Regardless
of whether trim weights are used in the tubes
or not, the overall trim of the JJ-CCR will not
change! The only difference is the required quan-
tity of lead on the diver’s lead belt.
The heavy duty stand is secured to the base plate of the base unit with 4 lock screws. The stand prevents
the JJ-CCR from falling and can also be used as a fastening point for stages, wheels, buoys, etc. whilst
diving.
It is possible to use two types of trim weights.
One can either opt for lead shot or lead bars. If
lead shot is used then it is first necessary to insert
a small piece of sponge into the tubes. This pre-
vents the lead shot from falling out. At the same
time, the sponge allows the water to run out.
4.3
Stand
