Jireh SKOOT-X Скачать руководство пользователя страница 2

Страница: 2 / 97

PAGE i of vi

EB0162 Rev 00

SAFETY WARNINGS / PRECAUTIONS

WARNING!

The

SKOOT • X

is designed for a specific use. Using

the

SKOOT • X

outside of its intended use is dangerous. Failure to comply

with the warnings, instructions, and specifications in this manual could
result in

SEVERE INJURY

DEATH

. Read and understand this manual

before using.

KEEP THIS MANUAL – DO NOT LOSE

THIS MANUAL IS PART OF THE

SKOOT • X

SYSTEM AND MUST BE RETAINED FOR

THE LIFE OF THE PRODUCT. PASS ON TO SUBSEQUENT OWNERS.

Ensure any amendments are incorporated with this document.

WARNING!

ELECTRICAL CORDS CAN BE HAZARDOUS.

Misuse can result in

FIRE

DEATH

ELECTRICAL SHOCK

. Inspect

thoroughly before each use. Do

NOT

use if damaged. Do

NOT

use when

wet. Keep away from water. Do

NOT

drive, drag or place objects over cord.

WARNING!

NOT

operate scanner in an explosive environment.

NOT

operate scanner in the presence of volatile substances.

WARNING!

If this product is to be used with any Child Products

listed in

(Chapter 2.2)

, be sure to read and comply with the warnings,

instructions, and specifications in the Child Product’s User Manual

(s)

WARNING!

DO NOT DISASSEMBLE.

No user-serviceable parts.

Disassembling any of the components in this product, beyond the instructions
in this user manual, could void the regulatory certifications and/or effect the
safety of the product.

Содержание SKOOT-X


































































































Результаты поиска

Содержание SKOOT-X

Отзывы:

Похожие инструкции для SKOOT-X

Бренды по названию

Популярные бренды

Jireh SKOOT-X, Руководство пользователя

Результаты поиска

Содержание SKOOT-X

Отзывы:

Похожие инструкции для SKOOT-X

Бренды по названию

Популярные бренды