manualshive.com logo in svg

Jireh SKOOT-X, Руководство пользователя, Страница: 56 / 97

Поделиться
Скачать
Jireh SKOOT-X Скачать руководство пользователя страница 56

PAGE 49 of 89

EB0162 Rev 00

6.2.2.  Magnetic System 

1. 

Attach the umbilical to the crawler 

(see “Umbilical” on page 26)

.

6.2.2.2  Scanner Installation/Removal Mat Use 

To place the crawler on the inspection surface, follow these steps:

NOTE:

 The manufacturer recommends two persons install the crawler on an 

inspection surface. One person to lower the crawler to the scan surface, 

and one person to operate the crawler via the handheld controller.

1. 

Ensure crawler preparation is complete 

(see “Preparation for Use” on 

page 21)

 and system startup has been performed 

(see “System 

Startup” on page 42)

.

CAUTION!

 Do 

NOT

 handle crawler using 

the umbilical cable. Use the provided handle.

CAUTION! 

To place the crawler on the 

inspection surface, use the scanner installation/
removal mat 

(Fig. 16)

 

as a spacer between the 

wheels and the surface on which the crawler is to 
drive. This is necessary to protect the electronic 
components within the crawler from damaging 
shock, should the crawler be slammed directly onto 
the surface.

WARNING! 

MAGNETIC MATERIAL

. The 

wheels of the crawler produce an extremely strong 
magnetic field which may cause failure or permanent 
damage to items such as watches, memory devices, 
CRT monitors, medical devices or other electronics.

Tools, magnets and metal objects can cut, pinch or 
entrap hands and fingers. 

HANDLE WITH CARE

. 

People with pacemakers or ICD’s must stay at least 

25 cm

 (10 in) 

away.

WARNING! 

MAGNETIC MATERIAL

. The 

installation/removal mat contains magnetic material. 
Those with pacemakers or ICD’s must stay at least 
10 cm 

(4 in)

 away.

Содержание SKOOT-X


































































































Отзывы:

Нет отзывов