PAGE 75 of 89
EB0162 Rev 00
8.3. Additional Issues
Problem
Possible Cause
Solution
Handheld
controller
display does
not activate
Input power requirements
not met.
Ensure input power meets requirements.
(see
“Power Requirements” on page 6)
The handheld controller
not plugged into power
controller.
Plug handheld controller into power
controller. Ensure connectors are dry, clean
and connector pins are not bent.
Umbilical cable not
properly connected.
Check umbilical cable connections at both
ends. Ensure connectors are dry, clean and
connector pins are not bent.
SKOOT • X
system not
started.
Start the
SKOOT • X
system.
(see “System
Startup” on page 42)
Damaged components in
the handheld controller,
crawler, power controller
or cabling.
Contact manufacturer.
(see “Jireh Industries Ltd.”
on page 2)
The handheld
controller
display is
activated, yet
the crawler
does not drive
Handheld controller is not
in the correct mode for
driving.
(see Operation on page 52 for additional
details)
.
Damaged components in
the handheld controller,
crawler, power controller
or cabling.
Contact manufacturer.
(see “Jireh Industries Ltd.”
on page 2)
The system
displays
“Please Wait –
Motor Moving”
when power is
applied.
The crawler is moving
when power is applied
due to an external force
(gravity, etc.)
.
Manually stop the crawler movement. The
crawler must be stationary for system
initialization to be performed.
For technical assistance
(see “Technical Support” on page 76).
