PAGE 23 of 89
EB0162 Rev 00
To configure the
SKOOT • X
chain system for scanning, follow these steps:
1.
Mount the source in the
1
source cart
(see “Source Cart” on page 34)
.
2.
Assemble the appropriate chain configuration to the
3
crawler
(see “SKOOT • X
Chain Configuration Setup Chart” on page 89)
.
3.
Mount a detector to the
4
detector bracket
(see “Attaching Detector to the Detector
Bracket” on page 29)
.
4.
Attach the
4
detector bracket to the
3
crawler
(see “Mounting Detector Bracket to
Crawler” on page 30)
.
5.
Connect the
10
power controller to the
3
crawler using the
5
umbilical.
6.
Connect the
11
handheld controller to the
10
power controller using the
9
auxiliary cable.
7.
Insert
12
AC/DC power supply into the
10
power controller.
CAUTION!
DO NOT DISCONNECT
UNDER LOAD.
Shut off power before connection or
disconnecting. Permanent damage to electronics
could occur.
