PAGE 45 of 89
EB0162 Rev 00
TIP:
The following example is configured for a 40.6 cm (16 in) pipe diameter.
3.
Remove the mounting plate from the source cart base
(see “Source Cart” on
page 18)
.
4.
Attach the umbilical to the crawler
(see “Umbilical” on page 26)
.
5.
Attach the cable
management and route
cabling
(see “Cable
Management” on page 38)
.
6.
Activate the system
(see
“System Startup” on page
42).
7.
Do not attach the detector
bracket or source to the
configuration until the setup
of the system is complete
and mounted securely to the
inspection surface.
8.
Drape the configured system
around the pipe/tube to be
inspected
(Fig. 90)
.
Fig. 90 - Place system on pipe/tube
