PAGE 26 of 89
5.4. Crawler
5.4.1. Umbilical
To mount the umbilical to the crawler, follow these steps:
1.
Align the pins of the umbilical to the connector at the rear of the
SKOOT • X
(Fig. 40)
.
2.
Twist the umbilical’s sleeve clockwise, locking the umbilical in place
(Fig. 41)
.
5.4.2. Handle
The handle can be lowered when required.
1.
To lower the handle, use the supplied 3 mm driver to loosen the handle lock
screws on either side of the handle
(Fig. 42)
.
Fig. 40 - Connect to umbilical
Fig. 41 - Align with crawler’s umbilical mount
Fig. 42 - Unscrew handle lock screw