Jet JTS-315LA, Руководство по эксплуатации

Страница: 80 / 141

Test Report No.: No.: 17706687 001
Part II of II
Page 40 of 63
EN 61029-1:2009+A11
Clause Requirement

Test Result - Remark Verdict
28 RESISTANCE TO HEAT, FIRE AND TRACKING P
28.1 Resistant to heat of external parts of insulation
material The testing is carried out for
TS-315D: switch box and
capacitor box (75°C)
TS-315G: switch box (75°C) P
Ball pressure test ......................................................: After 1 hour the diameter of the
impression inside the material:
is 1.1mm for all above test
specimen.
P
28.2 Insulating parts retaining live parts in position See below P
Ball pressure test ......................................................: TS-315D and TS-315G:
Motor slot insulation (132°C
and 120°C respectively):
Maximum value: 1.2mm
P
Conical mandrel test .................................................: Glow wire test:
TS-315D: Motor slot insulation,
switch box, motor slot wedge,
capacitor box: 550
℃
.
TS-315G: Motor slot
insulation, switch box, motor
slot wedge, capacitor box: 550
℃
.
P
28.3 Insulating parts retaining live parts in position P
Tracking test .............................................................: Test performed on motor slot
insulation. No flashover or
breakdown between electrodes
occurs.
P
29 RESISTANCE TO RUSTING P
Rusting test ...............................................................: No rusting parts cause the tool
to become unsafe.
P
30 Radiation P
There shall not emit harmful radiation P
Radiation test according to part 2 ............................: See part 2 P