Jet JTS-315LA, Руководство по эксплуатации

Страница: 90 / 141

Test Report No.: No.: 17706687 001
Part II of II
Page 50 of 63
EN 61029-2-1:2012
Clause Requirement

Test Result - Remark Verdict
Z103) instruction to use only saw blades
recommended by the manufacturer, which conform
to EN 847-1, if intended for wood and similar
materials;
Z104) instruction that, when changing the saw
blades, the width of the groove cut of the saw
blades shall not be less than and thickness of the
body of the saw blade shall not be more than the
thickness of the riving knife;
Z105) instruction that the selection of the saw
blade shall be suitable for the material to be cut;
Z106) instruction to wear suitable personal
protective equipment, this could include:
i) hearing protection to reduce the risk of
induced hearing loss;
ii) eye protection;
iii) respiratory protection to reduce the
risk of inhalation of harmful dust;
iv) gloves for handling saw blades and rough
material (recommendation that saw
blades should be carried in a holder
wherever practicable).
Z107) instruction to connect circular saws to
dust-collecting device when sawing wood;
Z108) warning not to use high speed steel (HS)
saw blades;
Z109) instruction to store the push-stick or push
block always with the machine when not in
use.
d) Maintenance and servicing
-
O erator s instru tions on a tors
influencing exposure to noise (e.g.
saw blades designed to reduce the
emitted noise, saw blade and
machine maintenance);
- Faults in the machine, including
guards or saw blades, should be
reported as soon as they are
discovered.
e) Safe operation