Jet JTS-315LA, Руководство по эксплуатации

Страница: 69 / 141

Test Report No.: No.: 17706687 001
Part II of II
Page 29 of 63
EN 61029-1:2009+A11
Clause Requirement

Test Result - Remark Verdict
Overload protection devices P
Electric strength test Checked and found
satisfactory N/A
16.2 Operation with no load 24hrs with 1.1times rating
voltage (253V for TS-315D,
440V for TS-315G) and 24hrs
with 0.9times rating voltage
(207V for TS-315D, 360V for
TS-315G). P
Cycle of operation 100s on and 20s off P
Tools with short time operation Not applicable N/A
Different normal use positions Not applicable N/A
Temperatures exceeding limits of 11.1 Not applicable N/A
16.3 Tools with centrifugal or automatic switch Not applicable N/A
17 ABNORMAL OPERATION P
17.1 Abnormal operating conditions for motors P
Commutator motor ...................................................: N/A
Induction Motor .........................................................: Motor locked 30s.
Temperature measured:
TS-315D: main winding:
51.6°C, auxiliary winding:
41.8°C.
TS-315G: winding: 168.7°C.
P
Three phase motor ...................................................: For TS-315D one phase
disconnected for 30s, the
winding temperature is
164.0°C.
P
17.2 Tools incorporating electronic control devices Not applicable N/A
17.3 Switches for motor reversal Not applicable N/A
Reversing test ..........................................................: Not applicable N/A
18 STABILITY AND MECHANICAL HAZARD P
18.1 Moving or other parts See below P
Protective enclosures, covers, guards and the like The blade above the table is
covered by guard. See also
Part 2. P
Fixed, movable or removable guards
The saw blade and moving
parts under the table are
covered by fixed guard.
P