Jet JTS-315LA, Руководство по эксплуатации

Страница: 93 / 141

Test Report No.: No.: 17706687 001
Part II of II
Page 53 of 63
EN 61029-2-1:2012
Clause Requirement

Test Result - Remark Verdict
12 LEAKAGE CURRENT P
13 ENVIRONMENTAL REQUIREMENTS P
13.2.1 The major sound sources of tools are:
- the saw blade;
- gears;
- the motor / the fan.
NOTE For general information concerning the
reduction of noise, see EN ISO 11688-1.
P
13.2.4 Circular saw benches are tested under load
under the conditions shown in Table Z101. P
13.3 This subclause is not applicable N/A
14 PROTECTION AGAINST INGRESS OF FOREIGN BODIES AND MOISTURE
RESISTANCE P
15 INSULATION RESISTANCE AND ELECTRIC STRENGTH P
16 ENDURANCE P
17 ABNORMAL OPERATION P
17.1
Addition:
Circular saw benches shall be considered to be
machines in which moving parts are liable to be
jammed, if equipped with an induction motor.
Considered P
18. STABILITY AND MECHANICAL HAZARDS P
18.1 Circular saws shall be equipped with an adequate
guarding system, which cannot be removed without
the aid of a tool. This requirement does not apply
to a top guard fixed to a riving knife. See below P
18.1.101 Guarding above the saw table P