Jet JTS-315LA, Руководство по эксплуатации

Страница: 56 / 141

Test Report No.: No.: 17706687 001
Part II of II
Page 16 of 63
EN 61029-1:2009+A11
Clause Requirement

Test Result - Remark Verdict
11.4 Operating time TS-315D: 1.06Ur: 90min,
0.94Ur: 90min
TS-315G: 1.06Ur: 77min,
0.94Ur: 119min P
11.5 Thermal cut-outs not operate and temperature rise
not exceed table 2 Not applicable N/A
11.6 Temperature rise of windings exceeding limits of
11.5 Limit of 11.5 not exceeded. N/A
12 LEAKAGE CURRENT P
12.1 Leakage current under normal use condition The leakage current is
measured immediately after
the temperature rise test with
1.06Ur. P
Measurement of leakage current .............................: The tool is switched on:
TS-315D:
L/N- Tool enclosure:
0.046/0.088mA
L/N- Switch box:
0.001/0.001mA
L/N- Motor enclosure:
0.049/0.090mA
TS-315G:
N- Tool enclosure:
0.039/0.085mA
N- Switch box: 0.001/0.001mA
N- Motor enclosure:
0.041/0.087mA
P
12.2 Conditions for measurement P
Location of poles P
Limits Class I tool: 0.75mA
Class II tool: 0.25mA P
Single pole switch N/A
Tools with heating elements N/A
13 ENVIRONMENT CONDITIONS P
13.1 Dust measuring N/A
Dust collecting device capability specified by the
manufacturer N/A
Measurement of dust collecting capability ...............: N/A
13.2 Noise P