Jet JTS-315LA, Руководство по эксплуатации

Страница: 73 / 141

Test Report No.: No.: 17706687 001
Part II of II
Page 33 of 63
EN 61029-1:2009+A11
Clause Requirement

Test Result - Remark Verdict

in the plug or

in a separate control box with one or more
socket outlets in accordance with EN 60309-2
with the earthing contact position 1 h.
PRCDs incorporated in the cord, in the plug or in
a separate control box shall have a degree of
protection against the ingress of water of at least
IPX4.
N/A
21 INTERNAL WIRING P
21.1 Protection of wiring P
Reduction of creepage and clearances P
Damaging of insulation The wires are so routed that
damage of the insulation is
unlikely. P
21.2 Protection of internal wiring by enclosure The basic insulated internal
wires are enclosed by
enclosure. P
21.3 Wireways P
Sharp edges, burrs flashes and the like No Sharp edges, burrs flashes
and the like, which are like to
damage the insulation. P
Bushings or well-rounded edges for holes in metal P
Moving parts There is adequate distance
between internal wire and
moving parts. P
21.4 Basic insulation of wires and accessible for class II
tools N/A
21.5 Conductors identified with green/yellow colour Green/yellow colour only used
by earthing conductor. P
21.6 Undue stress of wiring between different parts of
the machine Not applicable N/A
Protection by flexible metallic tubes N/A
Protection by open-coil spring N/A
Flexing of wires N/A
Flexing test ............................................................... : N/A
21.7 Distance of 25mm between wires and movable
parts during normal operation Wiring is not moved under
normal operating conditions. N/A
21.8 Aluminium wires No aluminium wires P