Jet JTS-315LA, Руководство по эксплуатации

Страница: 101 / 141

Test Report No.: No.: 17706687 001
Part II of II
Page 61 of 63
EN 61029-2-1:2012
Clause Requirement

Test Result - Remark Verdict
19. MECHANICAL STRENTH P
19.1 The saw blade guard above the table shall be
manufactured from:
a) steel having the following characteristics:
The thickness of saw blade
top guard: 3mm. Material is
PC. P
Ultimate tensile strength
N/mm
2
Minimum thickness
mm
350 1.5
380 1.25
b) light alloy having the following
characteristics:
Ultimate tensile strength
N/mm
2
Minimum thickness
mm
180 4
240 3
300 2
c) polycarbonate with a wall thickness of at
least 3 mm or other plastic material
having an impact strength equal to or
better than a polycarbonate of at least 3
mm thickness.
The saw blade guard below the table shall be
manufactured from the materials permitted for
the saw blade guard above the table.
The guarding system shall comply with the
requirements of 18.1.101 to 18.1.102.
Compliance is checked by examining the relevant
drawings, by measurement, and by Inspection of
the tool and by receipt of conformation of the
ultimate strength by the manufacturer of the
material.
The guard below the table is
made of Q235 steel (1.5-
2mm thickness). P