Jet JTS-315LA, Руководство по эксплуатации

Страница: 49 / 141

Test Report No.: No.: 17706687 001
Part II of II
Page 9 of 63
EN 61029-1:2009+A11
Clause Requirement

Test Result - Remark Verdict
Symbol or nature of supply ~ P
Rated frequency or range in hertz 50Hz P
Rated input in W or kW or rated current in amperes See labels P
Rated current in A, if greater than 10A N/A
The business name and address of the
manufacturer and, where applicable, his authorised
representative. Any address shall be sufficient to
ensure contact; See labels P
Designation of the tool;
Designation of the tool may be achieved by a
combination of letters and/or numbers;
See labels P
Designation of series or type;
Allowing the technical identification of the product:
this may be achieved by a combination of letters
and/or numbers and may be combined with the
designation of the tool;
See labels P
The year of manufacture; 2015 P
Rated operating time, or rated operating time and
rated resting time, in h, min or s, if applicable; S6 40% P
Symbol class II Class I N/A
IP degree if greater than IP20 IP44 P
Any mandatory mark showing compliance with
legislation by reference to this standard P
Tools for star-delta connection N/A
Alternate components which can be selected by
control device N/A
Rated input or current to be marked on the tool
shall be total maximum input or current on circuit at
the same time P
Additional marking P
7.2 Tools for short time operation N/A
Marking of short-time operation or intermittent
operation shall correspond to normal use N/A
Marking with operating/resting time N/A
7.3 Marking for tools with heating elements N/A
7.4 Adjustment of input, voltages N/A
7.5 Tools with more than one rated voltage P
7.6 Symbols for markings P