Jeep 2020 RENEGADE, Руководство пользователя

Страница: 23 / 484

GETTING TO KNOW YOUR VEHICLE 21
To Disarm The System
The vehicle security alarm can be disarmed
using any of the following methods:

Push the unlock button on the key fob.

Grasp the Passive Entry door handle to
unlock the door. Refer to “Keyless Enter-N-Go
— Passive Entry” in "Doors" in this chapter for
further information.

Place the ignition in the OFF mode to disarm
the system.
NOTE:

The driver's door key cylinder and the liftgate
button on the key fob cannot arm or disarm
the vehicle security alarm.

The vehicle security alarm remains armed
during liftgate entry. If someone enters the
vehicle through the liftgate and opens any
door, the alarm will sound.

When the vehicle security alarm is armed,
the interior power door lock switches will not
unlock the doors.
The vehicle security alarm is designed to protect
your vehicle. However, you can create
conditions where the system will give you a false
alarm. If one of the previously described arming
sequences has occurred, the vehicle security
alarm will arm, regardless of whether you are in
the vehicle or not. If you remain in the vehicle
and open a door, the alarm will sound. If this
occurs, disarm the vehicle security alarm.
If the vehicle security alarm is armed and the
battery becomes disconnected, the vehicle
security alarm will remain armed when the
battery is reconnected; the exterior lights will
flash, and the horn will sound. If this occurs,
disarm the vehicle security alarm.
Disabling
To completely disable the alarm (e.g. in the case
of long inactivity of the car), lock the doors by
turning the emergency key in the exterior door
lock cylinder.
NOTE:
If the batteries in the key fob discharge in the
event of a failure to the system or to turn the
alarm off, place the ignition in the ON/RUN posi -
tion.
DOORS
Manual Door Locks
To lock each door, rotate the door lock button
on each door trim panel forward. To unlock the
doors, pull the inside door handle to the first
detent or rotate the door lock button until the
lock symbol is no longer visible.
If the lock symbol is visible when the door is
shut, the door will lock. Therefore, make sure
the key fob is not inside the vehicle before
closing the door.
All doors and the liftgate can be programmed to
unlock on the use of one of the front door
interior handles. Refer to “Uconnect Settings” in
“Multimedia” for further information on
programming locking and unlocking
preferences.
Locking/Unlocking Doors From Outside
With the doors closed, insert the emergency key
into the driver exterior door lock cylinder and
turn to the right to lock the driver's door.
To unlock the driver’s door, insert the
emergency key into the driver exterior door lock
cylinder and turn to the left to unlock the
driver's door.
2
20_BV_OM_EN_USC_t.book Page 21