Jeep 2020 RENEGADE, Руководство пользователя

Страница: 183 / 484

STARTING AND OPERATING 181
When the system is off, the instrument cluster
display will read “Adaptive Cruise Control (ACC)
Off.”
NOTE:
You cannot engage ACC under the following
conditions:

When in Four-Wheel Drive Low.

When you apply the brakes.

When the parking brake is applied.

When the automatic transmission is in PARK,
REVERSE or NEUTRAL.

When the vehicle speed is outside of the
speed range.

When the brakes are overheated.

When driver switches ESC to Full Off mode.
To Set A Desired ACC Speed
When the vehicle reaches the speed desired,
push the SET (+) button or the SET (-) button
and release. The instrument cluster display will
show the set speed.
NOTE:
ACC cannot be set if there is a stationary vehicle
in front of your vehicle in close proximity.
Remove your foot from the accelerator pedal. If
you do not, the vehicle may continue to
accelerate beyond the set speed. If this occurs:

The message “Adaptive Cruise Control Over -
ride” will display in the instrument cluster
display.

The system will not be controlling the
distance between your vehicle and the
vehicle ahead. The vehicle speed will only be
determined by the position of the accelerator
pedal.
To Cancel
The following conditions cancel the system:

The brake pedal is applied.

The CANC button is pushed.

An Anti-Lock Brake System (ABS) event
occurs.

The gear selector is removed from the DRIVE
position.

The braking temperature exceeds normal
range (overheated).

The Electronic Stability Control/Traction
Control System (ESC/TCS) activates.

The vehicle parking brake is applied.

The driver switches ESC to Full Off mode.

Manual transmission is not in a forward gear
(if equipped).

Manual transmission is in NEUTRAL or clutch
pressed down for a fixed amount of time (if
equipped).
To Turn Off
The system will turn off and clear the set speed
in memory if:

The Adaptive Cruise Control (ACC) on/off
button is pushed.

The Normal (Fixed Speed) Cruise Control on/
off button is pushed.

The ignition is placed in the OFF position.

You switch to Four-Wheel Drive Low.
5
20_BV_OM_EN_USC_t.book Page 181