174
STARTING AND OPERATING
ACTIVE GRILLE SHUTTERS — IF EQUIPPED
Your vehicle may be equipped with Active Grille
Shutters, an automatic system with mobile
flaps applied in front of the cooling module,
whose automatic opening/closing movement
aims at improving the vehicle aerodynamic
efficiency and thus reducing consumption while
ensuring optimal engine operating temperature
conditions.
When a greater air flow is required for cooling
(e.g. when driving in urban traffic) the flaps
open, whereas when temperature is low or air
flow is enough (example when driving on
highways), the flaps close.
If there is a failure detected, the instrument
panel will illuminate the engine check/
malfunction indicator warning light.
POWER STEERING
The Electric Power Steering system will give you
good vehicle response and increased ease of
maneuverability in tight spaces. The system will
vary its assist to provide light efforts while
parking and good feel while driving. If the
electric steering system experiences a fault that
reduces assist or prevents the vehicle from
providing assist, you will still have the ability to
steer the vehicle manually.
If the “SERVICE POWER STEERING”
OR “POWER STEERING ASSIST OFF -
SERVICE SYSTEM” message and a
steering wheel icon are displayed on
the instrument cluster screen, it indicates that
the vehicle needs to be taken to the dealer for
service. It is likely the vehicle has lost power
steering assistance. Refer to “Instrument
Cluster Display” in “Getting To Know Your
Instrument Panel” for further information.
NOTE:
Even if the power steering assistance is no
longer operational, it is still possible to steer
the vehicle. Under these conditions there will
be a substantial increase in steering effort,
especially at low speeds and during parking
maneuvers.
If the condition persists, see an authorized
dealer for service.
STOP/START SYSTEM
The Stop/Start function was developed to
reduce fuel consumption. The system will stop
the engine automatically during a vehicle stop if
the required conditions are met. Releasing the
brake pedal or pressing the accelerator pedal
will automatically restart the engine.
Automatic Mode
The Stop/Start feature is enabled after every
normal customer engine start. At that time, the
system will go into STOP/START READY and if all
other conditions are met, can go into a STOP/
START AUTOSTOP ACTIVE “Autostop” mode.
To Activate The Autostop Mode, The Following
Must Occur:
The system must be in STOP/START READY
state. A STOP/START READY message will be
displayed in the instrument cluster display
within the Stop/Start section. Refer to
“Warning/Indicator Lights And Messages” in
“Getting To Know Your Instrument Panel” for
further information.
WARNING!
Continued operation with reduced assist
could pose a safety risk to yourself and oth
-
ers. Service should be obtained as soon as
possible.
20_BV_OM_EN_USC_t.book Page 174
Содержание 2020 RENEGADE
Страница 482: ......
