Jeep 2020 RENEGADE, Руководство пользователя

Страница: 206 / 484

204 STARTING AND OPERATING
PARKSENSE ACTIVE PARK ASSIST SYSTEM
— IF EQUIPPED
The ParkSense Active Park Assist system is
intended to assist the driver during Parallel,
Perpendicular, and Parallel Park Exit
maneuvers by identifying a proper parking
space, providing audible/visual instructions,
and controlling the steering wheel. The
ParkSense Active Park Assist system is defined
as “semi-automatic” since the driver maintains
control of the accelerator, gear selector and
brakes. Depending on the driver's parking
maneuver selection, the ParkSense Active Park
Assist system is capable of maneuvering a
vehicle into a parallel or a perpendicular
parking space on either side (i.e., driver side or
passenger side), as well as exiting a parallel
parking space.
NOTE:

The driver is always responsible for
controlling the vehicle, responsible for any
surrounding objects, and must intervene as
required.

The system is provided to assist the driver
and not to substitute the driver.

During a semi-automatic maneuver, if the
driver touches the steering wheel after being
instructed to remove their hands from the
steering wheel, the system will cancel, and
the driver will be required to manually
complete the parking maneuver.

The system may not work in all conditions
(e.g. environmental conditions such as heavy
rain, snow, etc., or if searching for a parking
space that has surfaces that will absorb the
ultrasonic sensor waves).
Enabling And Disabling The ParkSense
Active Park Assist System
The ParkSense Active Park Assist system can be
enabled and disabled with the ParkSense
Active Park Assist switch, located on the switch
panel below the Uconnect display.
To enable the ParkSense Active Park
Assist system, push the ParkSense
Active Park Assist switch once (LED
turns on).
To disable the ParkSense Active Park Assist
system, push the ParkSense Active Park Assist
switch again (LED turns off).
The ParkSense Active Park Assist system will
turn off automatically for any of the following
conditions:

The parking maneuver is completed.

Vehicle speed greater than 18 mph (30 km/h)
when searching for a parking space.

Vehicle speed greater than 5 mph (7 km/h)
during active steering guidance into the
parking space.
CAUTION!

ParkSense is only a parking aid and it is
unable to recognize every obstacle,
including small obstacles. Parking curbs
might be temporarily detected or not
detected at all. Obstacles located above or
below the sensors will not be detected
when they are in close proximity.

The vehicle must be driven slowly when
using ParkSense in order to be able to stop
in time when an obstacle is detected. It is
recommended that the driver looks over
his/her shoulder when using ParkSense.
20_BV_OM_EN_USC_t.book Page 204