250
IN CASE OF EMERGENCY
5. Remove the rear tail lamp, sliding it toward
the outside as shown.
Tail Lamp Removal
6. Unscrew the screws and remove the rear
tail lamp holder.
Rear Lamp Assembly
7. Replace the bulb as necessary.
Rear Tail Lamp Holder
8. Insert the new bulb, making sure it is
properly locked.
9. Reassemble the lamp assembly on the rear
tail lamp housing, tightening the screws.
10. Reposition the rear tail lamp on the car.
11. Secure the fastener of the rear tail lamp and
reconnect the electrical connector.
12. Reinstall the door making sure it locked into
place.
13. Finally close the liftgate.
LED Rear Tail Lamps – If Equipped
For replacement see an authorized dealer.
Reverse Lights – If Equipped With LED Tail
Lamps
1. Use a suitable tool to remove the screws
and remove the access door.
Reverse Light Access
1 — Mounting Screws
1 — Tail Light
2 — Reverse Bulb
3 — Position Light/Stop Light/Turn Signal
1 — Screw
2 — Screw
3 — Access Door
20_BV_OM_EN_USC_t.book Page 250
Содержание 2020 RENEGADE
Страница 482: ......