Jeep 2020 RENEGADE, Руководство пользователя

Страница: 71 / 484

GETTING TO KNOW YOUR VEHICLE 69
Cargo Load Floor
The vehicle is equipped with a load floor that
can be adjusted as needed.
Position 1 (Lowered Position):
This position allows you to make the load floor
flat for ease of loading/unloading objects from
the cargo area. This position also makes it
possible to use the space below as another
compartment for storing fragile or smaller
objects.
Position 2 (Elevated Position):
When the rear seatbacks and front passenger
seat is folded flat, it will allow for loading objects
of long dimensions. It is recommended to use
this position only during the actual transporting
of the objects, then bring the load floor in
position 1.
Table Tilt Load
In addition to the two positions described
above, the load floor can also be placed in a
tilted position, slanted toward the rear
seatbacks as to ease the access to the
underlying zone of the luggage compartment
(e.g. to pick up the spare tire or the
Tire Service Kit).
Place the load floor in a way that it rests at the
supports 1 and 2 on the sides of the cargo area.
The load floor provides securing of any cargo
inside this position, so that the cargo will not
slide in the case of sudden braking.
Load Floor
Table Tilt Load Supports
Access To The Loading Floor
To access the double load compartment,
proceed as follows:
1. Lift up on the Load Floor Handle.
Load Floor Handle
2. Place the desired objects inside the
compartment.
1 — Loading Floor Support One
2 — Loading Floor Support Two
1 — Cargo Load Floor
2 — Cargo Load Floor Handle
2
20_BV_OM_EN_USC_t.book Page 69