Operation
Working with the Machine
64
64
9811/5700-7
The load
– How heavy is it? Is it within the capabilities of the
machine?
– How bulky is it? The greater the surface area, the
more affected it will be by wind speeds.
– Is it an awkward shape? How is the weight
distributed? Uneven loads are more difficult to
handle.
– Is there a possibility of the load shifting whilst being
moved? If so, can it be secured on the forks?
Loading/unloading area
– Is it level? Any gradient of more than 2.5% (1 in 40)
should be carefully considered.
– Is more than one direction of approach to the load
possible? Approaching across the gradient should be
avoided, if possible.
– Is the ground firm? Will it support the weight of the
machine when loaded?
– How rough is the ground? Are there any sharp
projections which could cause damage, particularly to
the tyres?
– Are there any obstacles or hazards in the vicinity, for
example, debris, excavations, man-hole covers,
power lines?
– Is the space adequate for safe manoeuvring?
– Are any other vehicles or persons likely to be in or to
enter the area whilst operations are in progress?
The route to be traversed
– How firm is the ground, will it provide adequate
traction and braking?
– How steep are any gradients, up/down/across? Cross
gradients are particularly hazardous, is it possible to
detour to avoid them?
Weather
– How windy is it? High wind will adversely affect the
stability of a loaded machine, particularly if the load is
bulky.
– Is it raining or is rain likely? The ground that was firm
and smooth when dry will become uneven and
slippery when wet, and it will not offer the same
conditions for traction, steering or braking.
Lifting and Loading Operations
P5-2067
Ensure that all local and national legislation governing
operations such as lifting and loading are fully satisfied
before operating the machine. This should include the
selection of the correct model of machine for the operation,
and the planning of the lifting operation itself.
Содержание RTFL 926
