jcb RTFL 926 Скачать руководство пользователя страница 134

Страница: 134 / 200

Routine Maintenance

Brakes

124

9811/5700-7

Note:

Do not do this test for longer than 20 seconds.

Reduce engine speed to idle and select neutral.

Return the park brake lever to the fully on position.

Lower attachments and stop the engine.

If the machine moved during the test, adjust the park
brake and repeat the test. Refer to

Park Brake

Adjustment

Park Brake Adjustment

WARNING

Over adjustment of the park brake could result in the
park brake not fully releasing.

0011

Disengage the park brake (lever horizontal).

Turn handle grip

clockwise, half a turn.

Test the park brake.

If the brake fails the test, repeat steps 1, 2 and 3. If
there is no more adjustment and pin

is at the end of

its travel get the brake checked by your JCB dealer.

Fig 87.

Содержание RTFL 926









































































































































































































Результаты поиска

Содержание RTFL 926

Отзывы:

Бренды по названию

Популярные бренды

jcb RTFL 926, Руководство оператора

Результаты поиска

Содержание RTFL 926

Отзывы:

Бренды по названию

Популярные бренды