9 - 3
Section F
Transmission
9803/6410
Section F
9 - 3
Issue 1
Reduction Gear - JS130
Dismantling (cont’d)
7
Remove flange 3 complete with the inner race of bearing
21 from spindle 2.
Note: The component parts of bearing 21 are a matched set
and must remain together.
8
Remove the gear assembly comprising gear 4, gear B
5, crankshaft 9, bearing 22 and bearing 23 from hub 1.
Note: Do not dismantle the gear assembly. If any part is
damaged, renew the complete gear assembly as a set.
Remove the twenty-four pins 17 from the inner
circumference of hub 1.
Remove the clamping jig installed at step 6.
9
Fit two eye bolts (M16) to spindle 2. Attach suitable
lifting gear to the eye bolts and raise spindle 2, slowly
to avoid damaging the cage of bearing 21, away from
hub 1.
10
Remove the parts from inside hub 1 as follows:
a
Remove distance piece 10 and spring pin 37.
b
Remove and discard ‘O’-ring 28.
c
Remove bearing 21 inner race (with balls and cage).
Note: Do not remove bearing 21 outer race (as
described below) unless it needs renewing.
d
Position an aluminium bar A as shown against the
inner circumference of bearing 21 outer race and
remove the race by striking with a hammer.
JS00360
Содержание JS130
