34 - 15
Main Relief Valve
Dismantling
1
Secure adjusting screw
1
and housing
10
.
2
Slacken locknut
2
.
3
Secure relief valve body
4
.
4
Slacken locknut
3
.
5
Slacken relief valve body
4
and remove assembly from
main control valve housing.
6
Remove O’-ring
5
and discard.
7
Withdraw outer sleeve
6
from main control valve
housing.
8
Remove sleeve
7
.
9
Remove spring
8
.
Note:
Pilot seat
9
is press fitted into the relief valve body
4
.
Do not attempt to remove it.
10
Remove adjusting screw
1
with locknut
2
from housing
10
.
11
Remove ‘O’-ring
11
and discard.
12
Remove adjustment screw housing
10
with locknut
3
from relief valve body
4
.
13
Remove spring seat
12
, spring
13
and poppet
14
from
housing
10
.
Cleaning, Inspection
1
Clean all components in clean oil and dry with
compressed air.
2
Check that the seat surfaces on the end of the poppet
14
and seating
9
are defect free and contact surfaces
are uniform.
3
Check that the poppet sleeve
7
and outer sleeve
6
move smoothly and freely.
4
Check springs
8
and
13
have no defects, deformation
or wear.
5
Check that there is no foreign matter blocking orifices in
the main poppet or pilot seat.
6
Remove any minor defects by lapping.
7
Renew the relief valve if any damaged or badly worn
parts are found.
Section E
Hydraulics
9803/6410
Section E
34 - 15
Issue 1
Control Valve
JS01270
JS01280
Содержание JS130
