6 - 2
Throttle Motor and Throttle Link
Replacement (continued)
7 Installation of the throttle link lever
a
Install the lever on the new throttle motor without
forcing it.
b
Coat the screws
D
with loctite before fastening.
8
Installation of the throttle link
a
After installation of the throttle motor, install the
throttle links to the throttle lever and the control link.
9 Adjustment of Throttle Link
a
Switch it to redundancy.
b
Adjust the link of the engine side of the governor so
that it hits the stopper bolt on the Max side of the
throttle
UP
switch.
c
After checking that it does hit the screw, rotate the
spring chamber out 3 Complete rotations (counter
clockwise) from that position.
d
Adjust the length of the link so that the stroke of the
spring chamber is 1.5-5mm.
10 Confirmation of Throttle Motor Operations
a
Confirm that the 'electric system abnormality' is not
displayed in the monitor when the key switch is
ON
.
b
With the throttle volume at engine
MAX
position,
confirm that the spring chamber contracts, after the
link of the engine side governor hits the stop.
c
At the
STOP
side, with the throttle volume knob at
the engine
MIN
position, confirm that the spring
chamber contracts after the key switch is
OFF
.
Note:
Perform the automatic adjustment after confirmation
of the above adjustment.
Section C
Electrics
9803/6410
Section C
6 - 2
Issue 1
Throttle Motor
D
D
D
Содержание JS130
