6 - 1
Throttle Motor and Throttle Link
Replacement
1
Prepare the machine
Position the machine on level ground.
Stop the engine and remove the starter key.
2
Locate the throttle motor and link
See
Component Location Diagram in Routine
Maintenance
.
Note:
Upon delivery of the Throttle motor the position of the
output axis shaft is in a random position, so it needs
adjusting.
3
Throttle motor replacement
Connect the wiring of the Throttle motor and switch it to
the redundancy position.
Position the motor so that the output shaft is rotated
counter clockwise.
4
Removal of Throttle Link
Remove the nuts of the throttle link at the control lever
A
, then remove the nuts on the opposite end of the
throttle link at the throttle lever end
B
. Then remove the
link without disassembly.
5
Checking operation of Throttle Link
a
Confirm whether the Spring chamber
C
of the link
operates normally before installing the throttle motor.
b
Stand the link and press on it from the top, and
confirm that the spring has compressed
(approx 20 mm).
c
If using the throttle link when the spring does not
compress because of its internal corrosion, the
motor
will be damaged.
d
If the spring does not compress, replace it.
6
Disassembly of throttle link
a
While it is possible to disassemble the link it is
advisable to replace the unit with a new one.
b
If it is disassembled, reassemble the unit to the
dimensions shown opposite.
Note:
The overall dimensions shown are not fixed as each
installation may vary.
Section C
Electrics
9803/6410
Section C
6 -1
Issue 1
Throttle Motor
A
B
C
Содержание JS130
