Javad TRIUMPH-LS Скачать руководство пользователя страница 112

Страница: 112 / 168

www.javad.com

112

Coordinate Systems

be fairly close to their actual positions on the Earth (within

a few meters) and the appropriate coordinate system of the

entered/imported coordinates be selected, otherwise these

coordinates will become distorted. The only instance that

J-Field will not attempt to relate coordinates to the internal

3D LLH data structure is when the selected coordinate

system is “Unknown”. Using an Unknown coordinate system

allows the user to enter or import coordinates from a survey

or design which has no precise relationship to the Earth.

This Unknown coordinate system is meant to serve as a

temporary bridge between imported coordinates that are

not georeferenced (such as from a total station survey) to a

localized system subsequently created through localization.

Before any coordinate is entered or imported it is critically

important that the proper coordinate system be selected as

well as the proper units (HOME>SETUP>ADVANCED>UNITS).

In Coordinate Systems (All Projects Coordinate Systems)

J-Field keeps an Unknown Coordinate System ready for use

with the default name “?Unknown[date/time]” in which the

date and time are the date and time the system was created.

This name can easily be changed to something more

relevant to the user, such as an old job name, a parcel name,

a design project etc., by highlighting the unknown system

and pressing edit.

If more than one Unknown system is needed at a time,

press Add at the top of the screen and select Unknown at

the bottom left. A new Unknown system appears with the

default name. It is strongly recommended to change the

name of the unknown system to something meaningful to

reduce confusion should more than one Unknown system

with default naming conventions exist.

Содержание TRIUMPH-LS








































































































































































Результаты поиска

Содержание TRIUMPH-LS

Отзывы:

Похожие инструкции для TRIUMPH-LS

Бренды по названию

Популярные бренды

Javad TRIUMPH-LS, Руководство пользователя

Результаты поиска

Содержание TRIUMPH-LS

Отзывы:

Похожие инструкции для TRIUMPH-LS

Бренды по названию

Популярные бренды