Javad TRIUMPH-LS Скачать руководство пользователя страница 103

Страница: 103 / 168

www.javad.com

103

Using ShapeTags and Codes

This is my current list for “Type”. This list grows as I add

more attributes in the editor as well as in the field while

I’m collecting data based on my entry. Notice that I can

very quickly select 1/2” IRON ROD for my monument type

much faster than typing in this text. This is the case for all

attributes. Type it once and it is available very quickly any

time in the future.

Looking at another:

Here I’ve created one for Boundary. You can see that this

has the attributes pre-populated with my most commonly

encountered boundary monument, a 1/2 inch rebar found

in good condition. For my first attribute for “Found/Set” I

have a list already created that includes “Found” and “Set”.

For Size, I have a list that contains 3/8”, 1/2”, 5/8”, 3/4”. As I add

to these attributes the list grows. I can also delete attribute

values that are no longer needed. For the Boundary code,

I’ve preselected these values rather than <EMPTY> as

shown on the Control code.

When exporting your data, you can select the output to

something like:

This exports the name of the point, the N,E,H of the surveyed

(not design) point, the Description of the point, the Code

Name, the Attribute 1, 2, 3, 4 and 5. The plus signifies that

these elements will use Sep. 2 (separator 2) which I generally

have set to space. So a collected boundary point may look

like this:

1,6835851.497,3100685.44,395.789,BP, BOUNDARY FOUND

1/2” IRON ROD NONE GOOD

Where 1 is the point name,

Содержание TRIUMPH-LS








































































































































































Результаты поиска

Содержание TRIUMPH-LS

Отзывы:

Похожие инструкции для TRIUMPH-LS

Бренды по названию

Популярные бренды

Javad TRIUMPH-LS, Руководство пользователя

Результаты поиска

Содержание TRIUMPH-LS

Отзывы:

Похожие инструкции для TRIUMPH-LS

Бренды по названию

Популярные бренды