JAI VISCAM 1000 System, Руководство по установке

Страница: 19 / 60

Installing the VIS 13
VISCAM 1000 Systems
Figure 15. Connect TNL-50 wires to terminal blocks X5 and X12 on I/O Board
Table 5 TNL-50 flash unit connection in VISCAM AIO.
Pin X5 Signal Wire Color Description Connection to
1 I/O Gnd Black I/O Board Gnd Pin 2 (see Figure 15)
2 Gnd Black Flash Gnd
Flash ground (negative power terminal)
(GROUND)
3 Out White Strobe out Strobe input on flash unit (STROBE OUT)
4 Stat Blue Strobe status
Status output from flash unit (STROBE
STATUS)
5 FPWR Red Flash power
Power from I/O Board to output circuit on
I/O Board (pin 6)
6 24V Red
IO board 24V (Fused
0.5A)
Pin 5 (see Figure 15)
Pin X12 Signal Wire Color Description Connection to
7 RS-485+ Green RS-485+ For controlling TNL-50 Parameters
8 RS-485- Orange RS-485- For controlling TNL-50 Parameters