Installing the VIS
7
VISCAM 1000 Systems
3
Installing the VIS - Vehicle Imaging System
The individual components of the system are electrically linked together as shown in Figure 1, “VISCAM
1000 Installation Overview”.
3.1
VIS Power Requirements
The maximum power to a VJP-300 J-Panel is:
SYSTEM COMPONENTS
CURRENT
(STEADY STATE)
CURRENT
(INRUSH)
VISCAM 1000 System #0 (with heater on)
2.0A
3.5A
VISCAM 1000 System #1 (with heater on)
2.0A
3.5A
VJP-300 J-Panel
0.2A
1.5A
Total
4.2A
6.5A*
* Since all devices are connected to VJP-300 J-Panel, it limits total inrush current to 6.5A.
3.1.1
Installing the VISCAM 1000 System
The VISCAM 1000 has connections to the J-Panel and an optional Flash Night Light. In general, the
camera(s) should be aimed at the most likely cross-lane position of the vehicle license plates. See
“Installation Preparation” in Section 2 for general site layout guidelines. To install the camera(s):
1.
Attach VISCAM 1000, with mount, to the mounting structure. The hole pattern is shown in Figure 5 below:
Figure 5.
VISCAM 1000 Mount Dimensions.
Содержание VISCAM 1000 System
Страница 1: ...VISCAM 1000 System Vehicle Imaging Subsystem Document P N 10873 Document Version C...
Страница 2: ......
