System Set-Up
35
VISCAM 1000 Systems
1.
AVI and Streaming Video Format: select output format between 720p or 1080p. You must then “Save
to Flash” and reboot the camera before this setting takes effect.
2.
Video OSD Date Format: specify how the date will be displayed in the upper left corner of the AVI clip
or video stream. There are several options:
a.
None: the date will not be displayed.
b.
YYYY/MM/DD: date will be displayed as “Year/Month/Day”
c.
MM/DD/YYYY: date will be displayed as “Month/Day/ Year”
d.
DD/MM/YYYY: date will be displayed as “Day/Month/Year”
3.
Video OSD Time Format: specify how the current frame time will be displayed in the upper left corner
of the AVI clip or video stream; right below the date. There are several options:
a.
None: time is not displayed.
b.
12-hour: time is displayed as “Hour:Minute:Second[AM/PM]”. Hour is from 01 to 12.
c.
24-hour: time is displayed as “Hour:Minute:Second”. Hour is from 00 to 23.
d.
12-hour (ms): time is displayed as “Hour:Minute:Second.Miliseconds[AM/PM]”.
e.
24-hour (ms): time is displayed as “Hour:Minute:Second.Miliseconds”.
4.
Streaming Enable: enable/disable streaming. Streaming is required when AVI output is selected and
will automatically be enabled. To enable streaming only, unselect AVI in “Image Acquisition Image 1”
first, then set “Streaming Enable” to “Enable”.
a.
NOTE
: use this link in VLC or other software to see the video streaming:
i.
rtsp://[Camera IP]:8557/PSIA/Streaming/channels/0?videoCodecType=H.264
5.
Target FPS: specify the target frames per second for AVI and streaming output. The camera will try its
best to produce video close to this target. If the camera is busy then the frame rate may dip. Range
is from 1 to 20.
6.
Target Bit-rate: specify the data rate for the AVI and stream video in term of bits. Higher values
increase final AVI size and bandwidth needed to stream data, but results in better video quality.
Example values:
a.
2000000: 2Mbps.
b.
1800000: 1.8Mbps.
7.
Inter-frame Interval: specifies the number of P-frames between I-frames. I-frames (key frames)
contain complete video data. P-frames (predicted frames) are generated by the previous I-frame and
Содержание VISCAM 1000 System
Страница 1: ...VISCAM 1000 System Vehicle Imaging Subsystem Document P N 10873 Document Version C...
Страница 2: ......
