7 LUBRICATION
GB-28
7
LUBRICATION
7.1 GENERAL ________________________________________________________________
Periodically apply a small amount of lithium based grease
to the seat runners.
For smooth operation of all levers, pivot points and other
friction points that are not listed apply several drops of
SAE 30 oil every 50 hours or as required.
Note: Do not lubricate or grease rake attachment.
Lube Points
Lubricate pivot points listed every 50 hours. Use grease
that meets or exceeds NLGI Grade LB specifications.
Always clean the grease fitting before and after
lubricating. Apply grease with a manual grease gun and
fill slowly until grease begins to seep out. Do not use
compressed air guns.
1.
Rake Actuator- top and bottom
2.
Forward/reverse pedal pivot
3.
Brake pedal pivot
4.
Upper steering shaft
5.
Steering fork
6.
Lower steering shaft
Steering Chain
Spray chain lightly every 50 hours using a light lubricant,
such as WD 40.
Do not use grease or heavy chain lube.
7.2
REAR AXLE ______________________________________________________________
Check oil level in front axle gear box once a year. Oil
should be level with bottom of fill plug as shown (K).
Use only SAE 30W heavy duty engine oil.
Capacity 10-12 oz.
Figure 7A
WARNING
Before you clean, adjust, or repair this equipment,
disengage all drives, lower implements to the ground,
engage parking brake, and remove key from switch to
prevent injuries.
!
!
K
TR015
