Jacobsen HR 9016 Turbo 70538 Скачать руководство пользователя страница 19

Страница: 19 / 200

MAINTENANCE 4

en-19

MAINTENANCE

4.1 GENERAL ________________________________________________________________

1. Adjustment and maintenance should always be

performed by a qualified technician. If proper

adjustments cannot be made, contact an Authorized

Jacobsen Dealer.

2. Inspect the equipment on a regular basis, establish

a maintenance schedule, and keep detailed records.

a. Keep the equipment clean.

b. Keep all moving parts properly adjusted and

lubricated.

c. Replace worn or damaged parts before operating

the machine.

d. Keep all fluids at their proper levels.
e. Keep shields in place and all hardware securely

fastened.

Keep tires properly inflated.

3. Do not wear jewelry or loose fitting clothing when

making adjustments or repairs.

4. Use the illustrations in the Parts List as reference for

the disassembly and reassembly of components.

5. Recycle or dispose of al l hazardous materials

(batteries, fuel, lubricants, anti-freeze, etc.)

according to local, state, or federal regulations.

4.2

INSPECTING BLADES ______________________________________________________

1. Every 50 hours of operation or whenever mower is

removed from mower, carefully examine the blades

to make sure they are in good operating condition.

Blades showing any bends

(G)

, grooves

(H)

cracks (

must be replaced.

2. Any of th e above conditions can cause a pie ce of

the blade to break away and be h urled from the

mower, causing very serious injury to bystanders or

property damage.

3. A bent blade could have a mi croscopic crack (G)

that can grow and allow a piece of the blade to

break. Bent blades will also create vibration and

other stress on the machinery.

4. Dust or sand particles can wear a dangerous groove

in the blade (H) between the air vanes and the flat

portion of the b lade that will rapidly grow and

produce a c rack (J), permitting a piece of t he vane

to break off.

Figure 4A

WARNING

Before you clean, adjust, or repair this equipment,

disengage all drives, lower implements to the ground,

engage parking brake, stop engine, and remove key

from ignition switch to prevent injuries

Make sure the mower is parked on a solid and level

surface. Never work on a mower that is supported

only by the jack. Always use jack stands.

CAUTION

Use care when checking blades to avoid pinching hands

and fingers between blade ends.

WARNING

Never attempt to straighten, weld, or repair a

damaged blade. Always replace a damaged blade.

HR025

Содержание HR 9016 Turbo 70538









































































































































































































Результаты поиска

Содержание HR 9016 Turbo 70538

Отзывы:

Похожие инструкции для HR 9016 Turbo 70538

Бренды по названию

Популярные бренды

Jacobsen HR 9016 Turbo 70538, Руководство по запасным частям и обслуживанию

Результаты поиска

Содержание HR 9016 Turbo 70538

Отзывы:

Похожие инструкции для HR 9016 Turbo 70538

Бренды по названию

Популярные бренды