Izon qNano Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 56

Izon qNano Скачать руководство пользователя страница 20

KEY CONCEPTS WITHIN THE IZON CONTROL SUITE
SOFTWARE (CSS)

The Izon Control Suite Software (CSS) has two different data capture modes:

—

The Custom Planner tool – automatic data recording

The custom planner capture assistant allows the user to define a sample
measurement plan and then guides the user through the measurement
process, including sample preparation, system optimisation, and calibration.
The CSS assistant accommodates a wide range of measurement needs and
can be set up to allow the user to easily and repeatedly obtain consistent
measurements.

—

The Classic Capture tool – manual signal optimisation and recording

The classic capture tool allows the user to tune the system in real time, rapidly
respond to changes in the system, remeasure and calibrate different samples.
This manual data capture tool is used most often for quick feasibility studies,
and as the default tool for experienced instrument users who do not need the
measurement process prompts.

There are a few key concepts that the user needs to understand to complete
an assistant-based measurement.

2 /

20

www.izon.com

«
...
18
19
20
21
22
...
»

Содержание qNano

























































Отзывы:

Нет отзывов