Appendix
10.4 Information on EMC
The CANcheck is a class A device. This means that it has been constructed for in-
dustrial use and that it meets the EMC requirements for industrial devices.
If the CANcheck is used in office or home environment radiointerference can oc-
cur under extreme conditions.
To ensure faultless operation of the CANcheck, the following instructions must be
followed due to technical requirements of EMC:
-
use only the included accessories and cables
-
the CAN cable must be shielded
-
the shield of the CAN interface must be connected at the 9-pin D-Sub con-
nector and at the subscriber
If problems arise during operation of the CANcheck despite the instructions
above, the distance between potential sources or drains of interference (e. g. mo-
tors, frequency inverters) and the device should be incremented.
10.5 Declaration of conformity
IXXAT Automation declares that the product:
CAN Installation Tester
model:
CANcheck
with the article number:
1.01.0097.00000
complies with the EC directives 89/336/EEC.
This declaration applies to all devices bearing the CE symbol and loses its validity
if modifications are made to the product.
17.10.2006, Dipl.-Ing. Christian Schlegel, CEO
IXXAT Automation GmbH
Leibnizstraße 15
88250 Weingarten
Copyright IXXAT Automation GmbH
CANcheck Manual, Version 1.2
75
