Summarized tests
To receive an error-free test result, it is now necessary to repeat the operational
tests. Return to the system menu by pressing the ESC key twice. Start the opera-
tional tests by pressing the OK key.
Please acknowledge the result of the measurement of the power supply by press-
ing the OK key. Now switch the CAN nodes on and ensure that the CAN nodes
are sending telegrams.
When the baudrate detection is successfully completed, you receive the message
"TEST EXECUTED". The CANcheck has consequently not checked the test result.
Baudrate detection
TEST EXECUTED
NEXT INFO
You can see the test result via "INFO".
Baudrate detection
500 kBit/s
If CAN_H and CAN_L are inverted in all nodes in the CAN network – even in this
case communication is possible - the CANcheck detects the baudrate but classi-
fies the polarity as erroneous. In this case the following error message appears:
Baudrate detection
H-L inverted [ERROR]
500 kBit/s
Continue the operational tests by returning to the higher order menu with the
ESC key. Start the next test there with the virtual key "NEXT" and the OK key.
Copyright IXXAT Automation GmbH
CANcheck Manual, Version 1.2
20
