Individual tests
5 Individual
tests
The summarized tests from section 4 can also be executed individually. In this
way, "problematic" tests can be quickly repeated. If the test cannot be executed, a
more detailed error message is displayed.
In the system menu, select the menu item "Individual tests" with the key DOWN
and press the OK key. The symbol
▼
in the following header means that the list of
individual tests does not fit in the display. Scroll through the list with the key
DOWN.
System menu
-Line parameters
-Operat. parameters
-Individual tests
-Stored results
-Remote control
-Maintenance
Individual tests
▼
-Wiring test
-Term. resistors
-Line length
-Line impedance
-Power supply
-Baudrate detection
Individual tests
▲
►
-Power supply
-Baudrate detection
-Identifier scan
-Bus load
-Signal levels per id
-Trigger output
Now select an individual test with the keys UP and DOWN and confirm with OK.
Copyright IXXAT Automation GmbH
CANcheck Manual, Version 1.2
24
