IWAKI PUMPS EH-B10, Инструкция по эксплуатации

Страница: 19 / 64

- 17 -
• Arrange grounding!
Do not operate the pump without connecting the
grounding wire. Other wise, an electrical shock may
result. Make sure the grounding wire is connected with
the grounding terminal.
• Limited operating site and storage
Do not install or store the pump in the following places:
* Places where a flammable gas or material is used or
stored.
* Place where the ambient temperature is extremely high
(40ºC or higher) or extremely low (0ºC or lower).
• Cleaning
Wiping the pump body or the nameplate with a cloth
soaked in a solvent such as benzene, thinner or
kerosene may remove or change the color of the
coating. Use a dry cloth or a cloth soaked in water or
neutral detergent.
• If the pump is used for industrial porpose, the electric
power cable of the pump must be installed in the
enclosure which satisfies IP54 or in the atmosphere
corresponding to IP54
Prohibited
Prohibited