IWAKI PUMPS EH-B10, Инструкция по эксплуатации

Страница: 41 / 64

- 39 -
b
Press the key to enter the value. The display
stops flashing.
With the above step completed, the signal from the pH
electrode and set value are memorized.
n
Press the key to call up parameter SPAN. Place
the pH electrode in the pH4 standard liquid for 1 to 2
minutes. ( lights up.)
m
Set the value of the pH4 standard liquid.
Press the key to make the highest digit flash.
Pressing the key while the digit flashes increases
the value by 1. Pressing the key then moves the
flash to the next digit.
For the set value, take the value on the package of the
standard liquid in accordance with the temperature of
the liquid. (The value indicated for an electrode
without a temperature compensating element is
specified for a temperature of 25 °C.)
indicates blinking of the display.
Even when setting the parameter to the same value as the
current one, carry out steps
n
and
m
above.
,
Press the key to enter the value. The display
stops flashing.
With the above step completed, the signal from the pH
electrode and the set value are memorized.
.
With all the above steps completed, the calibration of
an electrode is completed.
F U N C
SPAN
F U N C
PB
MAN
ZERO SPAN
AUTO
°
C ALM
SET
spm
pH
Hi
Lo
PB
MAN
ZERO SPAN
AUTO
°
C ALM
SET
spm
pH
Hi
Lo
PB
PB
MAN
ZERO SPAN
AUTO
°
C ALM
SET
spm
pH
Hi
Lo
MAN
ZERO SPAN
AUTO
°
C ALM
SET
spm
pH
Hi
Lo