ITW GSE 6400 Tier 4, Руководство по эксплуатации

Страница: 3 / 105

Operation Manual – ITW GSE 6400 Tier 4
Introduction
This manual contains operation and maintenance information for a diesel engine-generator manufactured
by ITW GSE, Palmetto, Florida 34221
This manual, including all information contained therein, is exclusive and confidential property of
ITW GSE. This manual is not to be copied, reproduced, or delivered or disclosed to others, in
whole or in part, except with express written permission of ITW GSE.
This manual is not intended to be a textbook on electricity or electronics. Its primary purpose is to provide
information and instructions to experienced operators, electricians, and mechanics that have never
operated this equipment. It is the intent of this manual to guide and assist operators and maintenance
personnel in the proper use and care of the equipment.
Use of the manual should not be put off until trouble or a need for help develops. Read the instructions
before starting the unit. Learn to use the manual and to locate information contained in it. Its style and
arrangement are very similar to commercial aircraft manuals.
The manual is divided into three chapters plus appendices. Each chapter is divided into as many sections
as required. Each page is identified by chapter, section and page number, which are located in the lower,
outside corner.
When information located in another portion of the manual is referred to, a chapter, section, and
paragraph or figure number identify its location. For example: “(see Section 2-3, Paragraph 1.a.)” refers
to information located in Chapter 2, Section 3, Paragraph 1.a. If a chapter and section are not indicated in
a reference, the referenced material is located in the same section as the reference, for example: “(see
Paragraph 1.a.).”
Contents of the manual are arranged as follows:
Chapter 1 Description/Operation
Chapter 2 Servicing/Troubleshooting
Chapter 3 Manufacturer’s Literature
Appendix A Options
Appendix B Operation in Unusual Service Conditions
Appendix C Software Installation Procedures
Appendix D Schematics
OM2248 Rev B Page 2 of 104