ITW GSE 6400 Tier 4, Руководство по эксплуатации

Страница: 28 / 105

Operation Manual ITW GSE 6400 Tier 4
9) Check engine lubricating oil level. The oil gauge rod has “H” high-level and “L” low-level
marks to indicate operating lubrication oil supply. Oil level should be kept as near the high
mark as possible, without going over. See Figure 1-2-1 for capacity.
CAUTION
NEVER operate engine with oil level below “L” level or above “H” level mark.
NOTE: See Engine Manufacturer’s Operation Maintenance Manual for oil recommendations.
Figure 1-2-2: Oil Fill and Oil Level Check Locations
10) Check battery located inside the right-side cable tray. Inspect battery for proper connection of
terminals. Service or replace if necessary.
Oil Fill Cap
Dipstick
OM2248 Rev B Page 27 of 104