x
isel-
Ê«>VÌʵիiÌÊÊ*
£
Ìi`i`Ê«ÕÀ«Ãi
The ICP is a machine tool with three linear axes that can electronically be controlled.
A further (rotary) axis is available in addition.
- The machine is planned for training and the small assembly line production.
- It is designed for the application in dry rooms, business rooms, living and training areas
and in labs and small firms (maximal ambient temperature 40° C).
- The machine is suitable for milling, boring, cutting, engraving, proportioning, metering,
positioning, and many similar applications.
- You can install the most different suitable tooling tools or mount instruments, appropriate
for the above mentioned applications.
- Suitable tooling materials are light metal, plastics, wood, glass, printed circuit materials.
For safety reasons, graphite is not permissible (danger of explosion) as material.
Also not admissible are materials that produce health-endangering gases during
processing.
- The machine is prepared for a suction apparatus. With preference, this suctioning is
suitable for dry dust kinds (wood, printed circuit boards, etc.).
ÞÊvÀÊÌÞ«iÊÓÊ>`ÊÎ
- The complete controller and power electronics of four axes are contained in the controller
of this machine. The IMC4 controller (interpolation operation) is installed in the ICP.
The machine can also be operated in the CNC mode using the integrated FLASH EPROM.
- Using any computer, you can actuate the machine with the IMC4 controller via the serial
interface. In addition, you may execute an already internally stored processing program
(in flash EPROM) without computers.
- Optionally, two 24 V outputs, two 24 V inputs, and a 230 V output are available for
connecting further components (e.g. resistive loads).
ÞÊvÀÊÌÞ«iÊÎ
- With the ISY CAD/CAM software, you can directly pass on the previously generated
CNC data to the machine and initiate the processing of the work piece via a corresponding
controller program.
