IS5 COMMUNICATIONS iES26GF, Руководство пользователя

Страница: 97 / 174

iES26GF User’s Manual
UM-iES26GF-1.2.3-EN.docx Pages 92 of 169
Port Shaper Rate
Configures the rate of each port shaper. The default value is 500 .
This value is restricted to 100 to 1000000 when the Unit is kbps , and it
is restricted to 1 to 3300 when the Unit is Mbps .
Port Shaper Unit
Configures the unit of measurement for each port shaper rate as
kbps or M bps . The default value is kbps .
Save Click Save to save changes.
Reset
Click Reset to undo any changes made locally and revert to previously
saved values.
Cancel
Click Cancel to undo any changes made locally and return to the
previous page.
3)
Port Shaping
This page provides an overview of QoS Egress Port Shapers for all switch ports.
Figure 97 - QoS Egress Port Shapers interface
The following table describes the labels for the QoS Egress Port Shapers screen.
Label Description
Port The switch port number to which the following settings will be
applied. Click on the port number to configure the shapers. Details for
configuration can be found in the
QoS Egress Port Scheduler and
Shapers section.
Qn Shows disabled or actual port shaper rate - e.g. 800 Mbps