IS5 COMMUNICATIONS iES26GF Скачать руководство пользователя страница 143

Страница: 143 / 174

iES26GF

User’s

Manual

UM-iES26GF-1.2.3-EN.docx

Pages 138 of 169

Figure 134 - Detailed Port Statistics Port 1

The following table describes the labels for the

Detailed

Ports Statistics Port 1

screen.

Label

Description

Rx and Tx Packets

The number of received and transmitted (good and bad) packets.

Rx and Tx Octets

The number of received and transmitted (good and bad) bytes, including
FCS, except framing bits.

Rx and Tx Unicast

The number of received and transmitted (good and bad) unicast packets.

Rx and Tx Multicast

The number of received and transmitted (good and bad) multicast packets.

Rx and Tx Broadcast

The number of received and transmitted (good and bad) broadcast
packets.

Rx and Tx Pause

The number of MAC Control frames received or transmitted on this
port that have an opcode indicating a PAUSE operation.

Rx and Tx Size
Counters

The number of received and transmitted (good and bad) packets split into
categories based on their respective frame sizes.

Rx and Tx Queue
Counters

The number of received and transmitted packets per input and output
queue.

Rx Drops

The number of frames dropped due to insufficient receive buffer or
egress congestion.

Rx CRC/Alignment

The number of frames received with CRC or alignment errors.

Rx Undersize

The number of short1 frames received with a valid CRC.

Rx Oversize

The number of long2 frames received with a valid CRC.

Rx Fragments

The number of short1 frames received with an invalid CRC.

Rx Jabber

The number of long2 frames received with an invalid CRC.

Rx Filtered

The number of received frames filtered by the forwarding process.

Tx Drops

The number of frames dropped due to output buffer congestion.

Tx Late / Exc.Coll.

The number of frames dropped due to excessive or late collisions.

Notes: 1. Short frames are frames smaller than 64 bytes.

2. Long frames are frames longer than the maximum frame length configured for this port.

Содержание iES26GF















































































































































































Результаты поиска

Содержание iES26GF

Отзывы:

Похожие инструкции для iES26GF

Бренды по названию

Популярные бренды

IS5 COMMUNICATIONS iES26GF, Руководство пользователя

Результаты поиска

Содержание iES26GF

Отзывы:

Похожие инструкции для iES26GF

Бренды по названию

Популярные бренды