IS5 COMMUNICATIONS iES26GF, Руководство пользователя

Страница: 49 / 174

iES26GF User’s Manual
UM-iES26GF-1.2.3-EN.docx Pages 44 of 169
The following table describes the columns and labels for the LACP Port Configuration screen.
Label Description
Port The switch port number.
LACP Enabled
Controls whether LACP is enabled on this switch port. LACP will form
an aggregation when 2 or more ports are connected to the same
partner. Up to 32 aggregations are supported (if stackable).
Key
The Key value varies with the port, ranging from 1 to 65535. The options
available from the drop-down list are:
•
Auto will set the key according to the physical link speed (10Mb =
1, 100Mb = 2, 1Gb = 3).
•
Specific allows you to enter a user-defined value. Ports with the
same key value can join in the same aggregation group, while ports
with different keys cannot.
Role
Indicates the LACP activity status. The options are:
• Active will transmit LACP packets every second;
•
Passive will wait for a LACP packet from a partner (speak if spoken
to).
Save Click Save to save changes.
Reset
Click Reset to undo any changes made locally and revert to previously
saved values.
System Status
This page provides a status overview for all LACP instances.
Figure 49 - LACP System Status interface
The following table describes the columns and labels for the LACP System Status screen.
Label Description
Aggr ID
The aggregation ID is associated with the aggregation instance.
For LLAG, the ID is shown as '
isid:aggr-id ' and for GLAGs as ' aggr-id '.
Partner System ID System ID (MAC address) of the aggregation partner.
Partner Key The key assigned by the partner to the aggregation ID.
Partner Key The partner’s port priority.
Last Changed The time since this aggregation changed.
Last Changed
Indicates which ports belong to the aggregation of the switch/stack. The
format is
Switch ID: Port .
Refresh Click Refresh to refresh the page immediately.
Auto-refresh
Check Auto-refresh to enable an automatic refresh of the page at
regular intervals.