IS5 COMMUNICATIONS iES26GF, Руководство пользователя

Страница: 29 / 174

iES26GF User’s Manual
UM-iES26GF-1.2.3-EN.docx Pages 24 of 169
IP Setting
You can configure the IP Settings and DHCP client function through IP Configuration screen.
Figure 24 - IP Configuration interface
The following table describes the labels for the IP Configuration screen.
Label Description
DHCP Client
Enables or disables DHCP Client function. When the DHCP Client function
is enabled, an IP address from the network DHCP server will be assigned to
the switch.
IP Address
Assigns the IP Address that the network is using. If the DHCP client function
is enabled, you do not need to assign an IP Address. The network DHCP
server will assign the
IP Address for the switch and it will be displayed in
this column. The default IP Address is 192.168.10.1.
IP Mask
Assigns IP Mask . If the DHCP client function is enabled, you do not need to
assign an IP Mask . The default is 255.255.255.0.
IP Router
Assigns IP Router . If the DHCP client function is enabled, you do not need to
assign an IP Router . The default is 0.0.0.0.
VLAN ID
Assigns VLAN ID . If the DHCP client function is enabled, you do not need to
assign an VLAN ID . The default is 1.
Save Click Save to save changes
Reset Click Reset to undo any changes made.
IPv6 Configuration
Figure 25 - IPv6 Configuration interface