VX121P/151P/171P(-QM57)
User’s manual rev.0.0 (Preliminary)
24 of 68
MU-C656.xxxxxxxxxx r.0.0-EN
•
Fit the Panel PC into the cut-out.
•
Screw two grub screws into the holes present in each clamp, with the tips of
the grub screws towards the concave side of the clamp, (this step is
performed at the factory). Insert clamps into the holes present all around the
Panel PC.
Pos. Description
Note
1
User’s panel
2
rear part of the Panel PC
3
front panel of the Panel PC
Pos. Description
Note
4
Holes for clamps coupling Around the Panel PC there are 4/8 on the
upper/lower side and 4 on the left/ight side.
5
Clamp
Panel PC panel mounting needs 4/6 clamps.
Fitting into the cut-out on user panel
Inserting clamps into holes all around the Panel PC
1
2
3
4
4
5
