VX121P/151P/171P(-QM57)
User’s manual rev.0.0 (Preliminary)
8 of 68
MU-C656.xxxxxxxxxx r.0.0-EN
•
Before working on the rear part or inside the Panel PC the person
performing the operation must discharge any static electricity by
touching a metal part connected to the ground. Perform work in a
static safe environment. Check the 5Vsb (5V stand-by) is off (turn
off the input power then disconnect the power cord).
•
When making any interface connections to the Panel PC
(expansion cards, serial ports, PS/2 keyboard and mouse, etc.)
switch the system off. Only the connection of the USB ports can be
performed with the Panel PC on.
•
Avoid thermal shocks to the Panel PC.
•
Do not obstruct the ventilation slits.
•
Avoid turning the system ON and OFF frequently. After shutting
the system OFF, do not turn it ON back again until the hard disk
has come to a complete stop (takes about 20 seconds).
•
Always use the proper power down procedures as required by your
Operating System such as “Shut Down” command in WinXP.
•
The user should have considerations for data safety and integrity
on the hard disk drive or solid state disk (flash) and perform data
backup. Standard hard disks are not suitable to operate 24houres
x 7 days continuously.
•
During a thunderstorm do not make connection and do not touch
power supply and data transmission cables.
