VX121P/151P/171P(-QM57)
User’s manual rev.0.0 (Preliminary)
20 of 68
MU-C656.xxxxxxxxxx r.0.0-EN
4 Installing
Before installing the Panel PC, please read carefully the following information.
Caution
The Panel PC is permitted for indoor fixed applications only.
The Panel PC is set up for installation in a prepared recess such as in
the panel of a cabinet or a console.
Warning
Disconnect all electrical power and unplug the power cord before
installing the Panel PC.
Make sure the installation of the Panel PC maintains proper earthing.
The Panel PC requires connection to a power source having a quite
earthing.
Failure to follow these precautions may result in personal injury or
damage to the Panel PC or to the components.
Caution
A power outlet provided with an earthing connection and a mains
disconnect switch are required nearby and easily approachable.
The display should not be exposed to direct sun light or other strong
light sources.
Make sure the ambient temperature stays within the operating
temperature range as specified in the “Climatic condition” paragraph
later in this manual.
Be aware of other nearby devices, which may raise the ambient
temperature in the cabinet. Besides take in consideration the heating
of the Panel PC itself.
Make sure there is adequate room for airflow through the chassis
vent. The power supply fan cooler draw out the inside air flowing it
toward the bottom side. Avoid hot air heap up in the bottom area of
the Panel PC. Leave a free area all around the Panel PC: at least 20
cm on bottom side and 10 cm. from the other sides. More free area
could be required by the application.
